P01
Softwell Digital Practical Manual
Practical 01 - Create PCS 7 Multiproject Philosophy: Open the software, open the Softwell manual, and perform the practical.
PCS 7 DCS CFC SFC
Software: SIMATIC PCS 7 Engineering System, CFC, SFC, OS and runtime toolsSetup: Engineering laptop/workstation, PCS 7 training project, simulated plant
01
STEP 01 Open SIMATIC PCS 7 Engineering System and load the training project for Siemens PCS 7 DCS Manual.
v
02
STEP 02 Create or open the practical object for Create PCS 7 Multiproject.
v
03
STEP 03 Configure the required tags, parameters, blocks or screen objects for this PCS 7 DCS workflow.
v
04
STEP 04 Run compile, simulation, runtime or online monitoring as applicable and verify the practical behavior.
v
Expected Result Create PCS 7 Multiproject is completed, verified and documented inside the Siemens PCS 7 DCS Manual workflow.
Talk to Automation Advisor Get expert guidance for course selection, corporate training, project support and practical learning path.
Course Guidance Select the correct PLC SCADA, corporate, online or Industry 4.0 path.
Batch Support Get schedule, duration, mode and prerequisite guidance.
Project Advice Discuss plant, automation, reporting or training requirement.
P02
Softwell Digital Practical Manual
Practical 02 - Plant Hierarchy Setup Philosophy: Open the software, open the Softwell manual, and perform the practical.
PCS 7 DCS CFC SFC
Software: SIMATIC PCS 7 Engineering System, CFC, SFC, OS and runtime toolsSetup: Engineering laptop/workstation, PCS 7 training project, simulated plant
01
STEP 01 Open SIMATIC PCS 7 Engineering System and load the training project for Siemens PCS 7 DCS Manual.
v
02
STEP 02 Create or open the practical object for Plant Hierarchy Setup.
v
03
STEP 03 Configure the required tags, parameters, blocks or screen objects for this PCS 7 DCS workflow.
v
04
STEP 04 Run compile, simulation, runtime or online monitoring as applicable and verify the practical behavior.
v
Expected Result Plant Hierarchy Setup is completed, verified and documented inside the Siemens PCS 7 DCS Manual workflow.
Skills & Tools You Will Learn Important automation skills are arranged for job-level, project-level and Industry 4.0 learning.
PLC Programming Ladder, SCL/ST, hardware, I/O mapping and troubleshooting.
SCADA / HMI Tags, screens, alarms, trends, scripts and reporting.
Industry 4.0 Tools OPC UA, SQL Server, Python, dashboards and Excel/PDF reports.
P03
Softwell Digital Practical Manual
Practical 03 - Hardware Configuration Philosophy: Open the software, open the Softwell manual, and perform the practical.
PCS 7 DCS CFC SFC
Software: SIMATIC PCS 7 Engineering System, CFC, SFC, OS and runtime toolsSetup: Engineering laptop/workstation, PCS 7 training project, simulated plant
01
STEP 01 Open SIMATIC PCS 7 Engineering System and load the training project for Siemens PCS 7 DCS Manual.
v
02
STEP 02 Create or open the practical object for Hardware Configuration.
v
03
STEP 03 Configure the required tags, parameters, blocks or screen objects for this PCS 7 DCS workflow.
v
04
STEP 04 Run compile, simulation, runtime or online monitoring as applicable and verify the practical behavior.
v
Expected Result Hardware Configuration is completed, verified and documented inside the Siemens PCS 7 DCS Manual workflow.
P04
Softwell Digital Practical Manual
Practical 04 - Network Configuration Philosophy: Open the software, open the Softwell manual, and perform the practical.
PCS 7 DCS CFC SFC
Software: SIMATIC PCS 7 Engineering System, CFC, SFC, OS and runtime toolsSetup: Engineering laptop/workstation, PCS 7 training project, simulated plant
01
STEP 01 Open SIMATIC PCS 7 Engineering System and load the training project for Siemens PCS 7 DCS Manual.
v
02
STEP 02 Create or open the practical object for Network Configuration.
v
03
STEP 03 Configure the required tags, parameters, blocks or screen objects for this PCS 7 DCS workflow.
v
04
STEP 04 Run compile, simulation, runtime or online monitoring as applicable and verify the practical behavior.
v
Expected Result Network Configuration is completed, verified and documented inside the Siemens PCS 7 DCS Manual workflow.
Why Choose Softwell Automation Learn automation with practical examples, industrial troubleshooting approach and complete IT/OT learning path.
Industry Experienced Trainer Real plant examples and project based training.
Hands-on Learning PLC logic, SCADA, VFD, communication and reporting practice.
Flexible Modes Online, classroom, corporate and in-plant options.
P05
Softwell Digital Practical Manual
Practical 05 - Create CFC Chart Philosophy: Open the software, open the Softwell manual, and perform the practical.
PCS 7 DCS CFC SFC
Software: SIMATIC PCS 7 Engineering System, CFC, SFC, OS and runtime toolsSetup: Engineering laptop/workstation, PCS 7 training project, simulated plant
01
STEP 01 Open SIMATIC PCS 7 Engineering System and load the training project for Siemens PCS 7 DCS Manual.
v
02
STEP 02 Create or open the practical object for Create CFC Chart.
v
03
STEP 03 Configure the required tags, parameters, blocks or screen objects for this PCS 7 DCS workflow.
v
04
STEP 04 Run compile, simulation, runtime or online monitoring as applicable and verify the practical behavior.
v
Expected Result Create CFC Chart is completed, verified and documented inside the Siemens PCS 7 DCS Manual workflow.
Course Contents / Curriculum The curriculum follows a practical sequence from fundamentals to project integration.
Level 01 Basic PLC, wiring, addressing and ladder logic.
Level 02 Advanced PLC, networking, SCADA and diagnostics.
Level 03 OPC UA, SQL, Python, reports and IT/OT integration.
P06
Softwell Digital Practical Manual
Practical 06 - Motor Block in CFC Philosophy: Open the software, open the Softwell manual, and perform the practical.
PCS 7 DCS CFC SFC
Software: SIMATIC PCS 7 Engineering System, CFC, SFC, OS and runtime toolsSetup: Engineering laptop/workstation, PCS 7 training project, simulated plant
01
STEP 01 Open SIMATIC PCS 7 Engineering System and load the training project for Siemens PCS 7 DCS Manual.
v
02
STEP 02 Create or open the practical object for Motor Block in CFC.
v
03
STEP 03 Configure the required tags, parameters, blocks or screen objects for this PCS 7 DCS workflow.
v
04
STEP 04 Run compile, simulation, runtime or online monitoring as applicable and verify the practical behavior.
v
Expected Result Motor Block in CFC is completed, verified and documented inside the Siemens PCS 7 DCS Manual workflow.
Frequently Asked Questions About Siemens PCS 7 DCS Manual PCS 7 Process Control Practical Manual Who can join this training? Students, freshers, working engineers, maintenance teams and corporate plant engineers can join based on their requirement.
Is practical training included? Yes. The training is focused on PLC, SCADA, HMI, VFD, communication, troubleshooting and project based practice.
Can I request online or corporate training? Yes. Softwell Automation provides classroom, online, corporate and in-plant training options.
P07
Softwell Digital Practical Manual
Practical 07 - Valve Block in CFC Philosophy: Open the software, open the Softwell manual, and perform the practical.
PCS 7 DCS CFC SFC
Software: SIMATIC PCS 7 Engineering System, CFC, SFC, OS and runtime toolsSetup: Engineering laptop/workstation, PCS 7 training project, simulated plant
01
STEP 01 Open SIMATIC PCS 7 Engineering System and load the training project for Siemens PCS 7 DCS Manual.
v
02
STEP 02 Create or open the practical object for Valve Block in CFC.
v
03
STEP 03 Configure the required tags, parameters, blocks or screen objects for this PCS 7 DCS workflow.
v
04
STEP 04 Run compile, simulation, runtime or online monitoring as applicable and verify the practical behavior.
v
Expected Result Valve Block in CFC is completed, verified and documented inside the Siemens PCS 7 DCS Manual workflow.
P08
Softwell Digital Practical Manual
Practical 08 - Analog Channel Block Philosophy: Open the software, open the Softwell manual, and perform the practical.
PCS 7 DCS CFC SFC
Software: SIMATIC PCS 7 Engineering System, CFC, SFC, OS and runtime toolsSetup: Engineering laptop/workstation, PCS 7 training project, simulated plant
01
STEP 01 Open SIMATIC PCS 7 Engineering System and load the training project for Siemens PCS 7 DCS Manual.
v
02
STEP 02 Create or open the practical object for Analog Channel Block.
v
03
STEP 03 Configure the required tags, parameters, blocks or screen objects for this PCS 7 DCS workflow.
v
04
STEP 04 Run compile, simulation, runtime or online monitoring as applicable and verify the practical behavior.
v
Expected Result Analog Channel Block is completed, verified and documented inside the Siemens PCS 7 DCS Manual workflow.
P09
Softwell Digital Practical Manual
Practical 09 - PID Loop Setup Philosophy: Open the software, open the Softwell manual, and perform the practical.
PCS 7 DCS CFC SFC
Software: SIMATIC PCS 7 Engineering System, CFC, SFC, OS and runtime toolsSetup: Engineering laptop/workstation, PCS 7 training project, simulated plant
01
STEP 01 Open SIMATIC PCS 7 Engineering System and load the training project for Siemens PCS 7 DCS Manual.
v
02
STEP 02 Create or open the practical object for PID Loop Setup.
v
03
STEP 03 Configure the required tags, parameters, blocks or screen objects for this PCS 7 DCS workflow.
v
04
STEP 04 Run compile, simulation, runtime or online monitoring as applicable and verify the practical behavior.
v
Expected Result PID Loop Setup is completed, verified and documented inside the Siemens PCS 7 DCS Manual workflow.
P10
Softwell Digital Practical Manual
Practical 10 - Create SFC Sequence Philosophy: Open the software, open the Softwell manual, and perform the practical.
PCS 7 DCS CFC SFC
Software: SIMATIC PCS 7 Engineering System, CFC, SFC, OS and runtime toolsSetup: Engineering laptop/workstation, PCS 7 training project, simulated plant
01
STEP 01 Open SIMATIC PCS 7 Engineering System and load the training project for Siemens PCS 7 DCS Manual.
v
02
STEP 02 Create or open the practical object for Create SFC Sequence.
v
03
STEP 03 Configure the required tags, parameters, blocks or screen objects for this PCS 7 DCS workflow.
v
04
STEP 04 Run compile, simulation, runtime or online monitoring as applicable and verify the practical behavior.
v
Expected Result Create SFC Sequence is completed, verified and documented inside the Siemens PCS 7 DCS Manual workflow.
P11
Softwell Digital Practical Manual
Practical 11 - Process Tags and Symbols Philosophy: Open the software, open the Softwell manual, and perform the practical.
PCS 7 DCS CFC SFC
Software: SIMATIC PCS 7 Engineering System, CFC, SFC, OS and runtime toolsSetup: Engineering laptop/workstation, PCS 7 training project, simulated plant
01
STEP 01 Open SIMATIC PCS 7 Engineering System and load the training project for Siemens PCS 7 DCS Manual.
v
02
STEP 02 Create or open the practical object for Process Tags and Symbols.
v
03
STEP 03 Configure the required tags, parameters, blocks or screen objects for this PCS 7 DCS workflow.
v
04
STEP 04 Run compile, simulation, runtime or online monitoring as applicable and verify the practical behavior.
v
Expected Result Process Tags and Symbols is completed, verified and documented inside the Siemens PCS 7 DCS Manual workflow.
P12
Softwell Digital Practical Manual
Practical 12 - Compile AS Program Philosophy: Open the software, open the Softwell manual, and perform the practical.
PCS 7 DCS CFC SFC
Software: SIMATIC PCS 7 Engineering System, CFC, SFC, OS and runtime toolsSetup: Engineering laptop/workstation, PCS 7 training project, simulated plant
01
STEP 01 Open SIMATIC PCS 7 Engineering System and load the training project for Siemens PCS 7 DCS Manual.
v
02
STEP 02 Create or open the practical object for Compile AS Program.
v
03
STEP 03 Configure the required tags, parameters, blocks or screen objects for this PCS 7 DCS workflow.
v
04
STEP 04 Run compile, simulation, runtime or online monitoring as applicable and verify the practical behavior.
v
Expected Result Compile AS Program is completed, verified and documented inside the Siemens PCS 7 DCS Manual workflow.
P13
Softwell Digital Practical Manual
Practical 13 - OS Project Compilation Philosophy: Open the software, open the Softwell manual, and perform the practical.
PCS 7 DCS CFC SFC
Software: SIMATIC PCS 7 Engineering System, CFC, SFC, OS and runtime toolsSetup: Engineering laptop/workstation, PCS 7 training project, simulated plant
01
STEP 01 Open SIMATIC PCS 7 Engineering System and load the training project for Siemens PCS 7 DCS Manual.
v
02
STEP 02 Create or open the practical object for OS Project Compilation.
v
03
STEP 03 Configure the required tags, parameters, blocks or screen objects for this PCS 7 DCS workflow.
v
04
STEP 04 Run compile, simulation, runtime or online monitoring as applicable and verify the practical behavior.
v
Expected Result OS Project Compilation is completed, verified and documented inside the Siemens PCS 7 DCS Manual workflow.
P14
Softwell Digital Practical Manual
Practical 14 - Faceplate Link Test Philosophy: Open the software, open the Softwell manual, and perform the practical.
PCS 7 DCS CFC SFC
Software: SIMATIC PCS 7 Engineering System, CFC, SFC, OS and runtime toolsSetup: Engineering laptop/workstation, PCS 7 training project, simulated plant
01
STEP 01 Open SIMATIC PCS 7 Engineering System and load the training project for Siemens PCS 7 DCS Manual.
v
02
STEP 02 Create or open the practical object for Faceplate Link Test.
v
03
STEP 03 Configure the required tags, parameters, blocks or screen objects for this PCS 7 DCS workflow.
v
04
STEP 04 Run compile, simulation, runtime or online monitoring as applicable and verify the practical behavior.
v
Expected Result Faceplate Link Test is completed, verified and documented inside the Siemens PCS 7 DCS Manual workflow.
P15
Softwell Digital Practical Manual
Practical 15 - Alarm Configuration Philosophy: Open the software, open the Softwell manual, and perform the practical.
PCS 7 DCS CFC SFC
Software: SIMATIC PCS 7 Engineering System, CFC, SFC, OS and runtime toolsSetup: Engineering laptop/workstation, PCS 7 training project, simulated plant
01
STEP 01 Open SIMATIC PCS 7 Engineering System and load the training project for Siemens PCS 7 DCS Manual.
v
02
STEP 02 Create or open the practical object for Alarm Configuration.
v
03
STEP 03 Configure the required tags, parameters, blocks or screen objects for this PCS 7 DCS workflow.
v
04
STEP 04 Run compile, simulation, runtime or online monitoring as applicable and verify the practical behavior.
v
Expected Result Alarm Configuration is completed, verified and documented inside the Siemens PCS 7 DCS Manual workflow.
P16
Softwell Digital Practical Manual
Practical 16 - Trend Configuration Philosophy: Open the software, open the Softwell manual, and perform the practical.
PCS 7 DCS CFC SFC
Software: SIMATIC PCS 7 Engineering System, CFC, SFC, OS and runtime toolsSetup: Engineering laptop/workstation, PCS 7 training project, simulated plant
01
STEP 01 Open SIMATIC PCS 7 Engineering System and load the training project for Siemens PCS 7 DCS Manual.
v
02
STEP 02 Create or open the practical object for Trend Configuration.
v
03
STEP 03 Configure the required tags, parameters, blocks or screen objects for this PCS 7 DCS workflow.
v
04
STEP 04 Run compile, simulation, runtime or online monitoring as applicable and verify the practical behavior.
v
Expected Result Trend Configuration is completed, verified and documented inside the Siemens PCS 7 DCS Manual workflow.
P17
Softwell Digital Practical Manual
Practical 17 - Operator Station Runtime Philosophy: Open the software, open the Softwell manual, and perform the practical.
PCS 7 DCS CFC SFC
Software: SIMATIC PCS 7 Engineering System, CFC, SFC, OS and runtime toolsSetup: Engineering laptop/workstation, PCS 7 training project, simulated plant
01
STEP 01 Open SIMATIC PCS 7 Engineering System and load the training project for Siemens PCS 7 DCS Manual.
v
02
STEP 02 Create or open the practical object for Operator Station Runtime.
v
03
STEP 03 Configure the required tags, parameters, blocks or screen objects for this PCS 7 DCS workflow.
v
04
STEP 04 Run compile, simulation, runtime or online monitoring as applicable and verify the practical behavior.
v
Expected Result Operator Station Runtime is completed, verified and documented inside the Siemens PCS 7 DCS Manual workflow.
P18
Softwell Digital Practical Manual
Practical 18 - Diagnostics Check Philosophy: Open the software, open the Softwell manual, and perform the practical.
PCS 7 DCS CFC SFC
Software: SIMATIC PCS 7 Engineering System, CFC, SFC, OS and runtime toolsSetup: Engineering laptop/workstation, PCS 7 training project, simulated plant
01
STEP 01 Open SIMATIC PCS 7 Engineering System and load the training project for Siemens PCS 7 DCS Manual.
v
02
STEP 02 Create or open the practical object for Diagnostics Check.
v
03
STEP 03 Configure the required tags, parameters, blocks or screen objects for this PCS 7 DCS workflow.
v
04
STEP 04 Run compile, simulation, runtime or online monitoring as applicable and verify the practical behavior.
v
Expected Result Diagnostics Check is completed, verified and documented inside the Siemens PCS 7 DCS Manual workflow.
P19
Softwell Digital Practical Manual
Practical 19 - Backup PCS 7 Project Philosophy: Open the software, open the Softwell manual, and perform the practical.
PCS 7 DCS CFC SFC
Software: SIMATIC PCS 7 Engineering System, CFC, SFC, OS and runtime toolsSetup: Engineering laptop/workstation, PCS 7 training project, simulated plant
01
STEP 01 Open SIMATIC PCS 7 Engineering System and load the training project for Siemens PCS 7 DCS Manual.
v
02
STEP 02 Create or open the practical object for Backup PCS 7 Project.
v
03
STEP 03 Configure the required tags, parameters, blocks or screen objects for this PCS 7 DCS workflow.
v
04
STEP 04 Run compile, simulation, runtime or online monitoring as applicable and verify the practical behavior.
v
Expected Result Backup PCS 7 Project is completed, verified and documented inside the Siemens PCS 7 DCS Manual workflow.
P20
Softwell Digital Practical Manual
Practical 20 - Final PCS 7 DCS Project Philosophy: Open the software, open the Softwell manual, and perform the practical.
PCS 7 DCS CFC SFC
Software: SIMATIC PCS 7 Engineering System, CFC, SFC, OS and runtime toolsSetup: Engineering laptop/workstation, PCS 7 training project, simulated plant
01
STEP 01 Open SIMATIC PCS 7 Engineering System and load the training project for Siemens PCS 7 DCS Manual.
v
02
STEP 02 Create or open the practical object for Final PCS 7 DCS Project.
v
03
STEP 03 Configure the required tags, parameters, blocks or screen objects for this PCS 7 DCS workflow.
v
04
STEP 04 Run compile, simulation, runtime or online monitoring as applicable and verify the practical behavior.
v
Expected Result Final PCS 7 DCS Project is completed, verified and documented inside the Siemens PCS 7 DCS Manual workflow.
