Blogs Gallery Manuals Videos
+91-9175475416

Wincc Unified Manual

Official Philosophy: Open the software, open the Softwell Notebook, and perform the practical.

20 Matching Lab Practicals
Action Flow Manual
No Theory / Only Practical
Softwell Training Template

Softwell
Digital Practical
Notebook

[check] Open -> Click -> Select -> Download -> Test -> Complete

NO THEORY * ONLY PRACTICAL
P01

Softwell Digital Practical Manual

Practical 01 - Create WinCC Unified Device

Philosophy: Open the software, open the Softwell manual, and perform the practical.

WinCC UnifiedSCADAHMIRuntime
Software: WinCC Unified, TIA Portal, Unified Runtime / Unified Comfort Panel
Setup: Engineering laptop, PLC tags or simulator, Unified runtime target
01
STEP 01
Open WinCC Unified and load the training project for WinCC Unified SCADA Manual.
v
02
STEP 02
Create or open the practical object for Create WinCC Unified Device.
v
03
STEP 03
Configure the required tags, parameters, blocks or screen objects for this WinCC Unified SCADA workflow.
v
04
STEP 04
Run compile, simulation, runtime or online monitoring as applicable and verify the practical behavior.
v
05
STEP 05
Save the work, record the result and tick Practical Create WinCC Unified Device as complete.

Expected Result

Create WinCC Unified Device is completed, verified and documented inside the WinCC Unified SCADA Manual workflow.

Talk to Automation Advisor

Get expert guidance for course selection, corporate training, project support and practical learning path.

Course GuidanceSelect the correct PLC SCADA, corporate, online or Industry 4.0 path.
Batch SupportGet schedule, duration, mode and prerequisite guidance.
Project AdviceDiscuss plant, automation, reporting or training requirement.
P02

Softwell Digital Practical Manual

Practical 02 - Connect PLC Tags

Philosophy: Open the software, open the Softwell manual, and perform the practical.

WinCC UnifiedSCADAHMIRuntime
Software: WinCC Unified, TIA Portal, Unified Runtime / Unified Comfort Panel
Setup: Engineering laptop, PLC tags or simulator, Unified runtime target
01
STEP 01
Open WinCC Unified and load the training project for WinCC Unified SCADA Manual.
v
02
STEP 02
Create or open the practical object for Connect PLC Tags.
v
03
STEP 03
Configure the required tags, parameters, blocks or screen objects for this WinCC Unified SCADA workflow.
v
04
STEP 04
Run compile, simulation, runtime or online monitoring as applicable and verify the practical behavior.
v
05
STEP 05
Save the work, record the result and tick Practical Connect PLC Tags as complete.

Expected Result

Connect PLC Tags is completed, verified and documented inside the WinCC Unified SCADA Manual workflow.

Skills & Tools You Will Learn

Important automation skills are arranged for job-level, project-level and Industry 4.0 learning.

PLC ProgrammingLadder, SCL/ST, hardware, I/O mapping and troubleshooting.
SCADA / HMITags, screens, alarms, trends, scripts and reporting.
Industry 4.0 ToolsOPC UA, SQL Server, Python, dashboards and Excel/PDF reports.
P03

Softwell Digital Practical Manual

Practical 03 - Create Main Screen

Philosophy: Open the software, open the Softwell manual, and perform the practical.

WinCC UnifiedSCADAHMIRuntime
Software: WinCC Unified, TIA Portal, Unified Runtime / Unified Comfort Panel
Setup: Engineering laptop, PLC tags or simulator, Unified runtime target
01
STEP 01
Open WinCC Unified and load the training project for WinCC Unified SCADA Manual.
v
02
STEP 02
Create or open the practical object for Create Main Screen.
v
03
STEP 03
Configure the required tags, parameters, blocks or screen objects for this WinCC Unified SCADA workflow.
v
04
STEP 04
Run compile, simulation, runtime or online monitoring as applicable and verify the practical behavior.
v
05
STEP 05
Save the work, record the result and tick Practical Create Main Screen as complete.

Expected Result

Create Main Screen is completed, verified and documented inside the WinCC Unified SCADA Manual workflow.

P04

Softwell Digital Practical Manual

Practical 04 - Add Navigation Buttons

Philosophy: Open the software, open the Softwell manual, and perform the practical.

WinCC UnifiedSCADAHMIRuntime
Software: WinCC Unified, TIA Portal, Unified Runtime / Unified Comfort Panel
Setup: Engineering laptop, PLC tags or simulator, Unified runtime target
01
STEP 01
Open WinCC Unified and load the training project for WinCC Unified SCADA Manual.
v
02
STEP 02
Create or open the practical object for Add Navigation Buttons.
v
03
STEP 03
Configure the required tags, parameters, blocks or screen objects for this WinCC Unified SCADA workflow.
v
04
STEP 04
Run compile, simulation, runtime or online monitoring as applicable and verify the practical behavior.
v
05
STEP 05
Save the work, record the result and tick Practical Add Navigation Buttons as complete.

Expected Result

Add Navigation Buttons is completed, verified and documented inside the WinCC Unified SCADA Manual workflow.

Why Choose Softwell Automation

Learn automation with practical examples, industrial troubleshooting approach and complete IT/OT learning path.

Industry Experienced TrainerReal plant examples and project based training.
Hands-on LearningPLC logic, SCADA, VFD, communication and reporting practice.
Flexible ModesOnline, classroom, corporate and in-plant options.
P05

Softwell Digital Practical Manual

Practical 05 - Create Motor Control Faceplate

Philosophy: Open the software, open the Softwell manual, and perform the practical.

WinCC UnifiedSCADAHMIRuntime
Software: WinCC Unified, TIA Portal, Unified Runtime / Unified Comfort Panel
Setup: Engineering laptop, PLC tags or simulator, Unified runtime target
01
STEP 01
Open WinCC Unified and load the training project for WinCC Unified SCADA Manual.
v
02
STEP 02
Create or open the practical object for Create Motor Control Faceplate.
v
03
STEP 03
Configure the required tags, parameters, blocks or screen objects for this WinCC Unified SCADA workflow.
v
04
STEP 04
Run compile, simulation, runtime or online monitoring as applicable and verify the practical behavior.
v
05
STEP 05
Save the work, record the result and tick Practical Create Motor Control Faceplate as complete.

Expected Result

Create Motor Control Faceplate is completed, verified and documented inside the WinCC Unified SCADA Manual workflow.

Course Contents / Curriculum

The curriculum follows a practical sequence from fundamentals to project integration.

Level 01Basic PLC, wiring, addressing and ladder logic.
Level 02Advanced PLC, networking, SCADA and diagnostics.
Level 03OPC UA, SQL, Python, reports and IT/OT integration.
P06

Softwell Digital Practical Manual

Practical 06 - Add Numeric IO Field

Philosophy: Open the software, open the Softwell manual, and perform the practical.

WinCC UnifiedSCADAHMIRuntime
Software: WinCC Unified, TIA Portal, Unified Runtime / Unified Comfort Panel
Setup: Engineering laptop, PLC tags or simulator, Unified runtime target
01
STEP 01
Open WinCC Unified and load the training project for WinCC Unified SCADA Manual.
v
02
STEP 02
Create or open the practical object for Add Numeric IO Field.
v
03
STEP 03
Configure the required tags, parameters, blocks or screen objects for this WinCC Unified SCADA workflow.
v
04
STEP 04
Run compile, simulation, runtime or online monitoring as applicable and verify the practical behavior.
v
05
STEP 05
Save the work, record the result and tick Practical Add Numeric IO Field as complete.

Expected Result

Add Numeric IO Field is completed, verified and documented inside the WinCC Unified SCADA Manual workflow.

Frequently Asked Questions About WinCC Unified SCADA Manual Unified HMI and SCADA Practical Manual

Who can join this training?

Students, freshers, working engineers, maintenance teams and corporate plant engineers can join based on their requirement.

Is practical training included?

Yes. The training is focused on PLC, SCADA, HMI, VFD, communication, troubleshooting and project based practice.

Can I request online or corporate training?

Yes. Softwell Automation provides classroom, online, corporate and in-plant training options.

P07

Softwell Digital Practical Manual

Practical 07 - Create Alarm Classes

Philosophy: Open the software, open the Softwell manual, and perform the practical.

WinCC UnifiedSCADAHMIRuntime
Software: WinCC Unified, TIA Portal, Unified Runtime / Unified Comfort Panel
Setup: Engineering laptop, PLC tags or simulator, Unified runtime target
01
STEP 01
Open WinCC Unified and load the training project for WinCC Unified SCADA Manual.
v
02
STEP 02
Create or open the practical object for Create Alarm Classes.
v
03
STEP 03
Configure the required tags, parameters, blocks or screen objects for this WinCC Unified SCADA workflow.
v
04
STEP 04
Run compile, simulation, runtime or online monitoring as applicable and verify the practical behavior.
v
05
STEP 05
Save the work, record the result and tick Practical Create Alarm Classes as complete.

Expected Result

Create Alarm Classes is completed, verified and documented inside the WinCC Unified SCADA Manual workflow.

P08

Softwell Digital Practical Manual

Practical 08 - Configure Alarm View

Philosophy: Open the software, open the Softwell manual, and perform the practical.

WinCC UnifiedSCADAHMIRuntime
Software: WinCC Unified, TIA Portal, Unified Runtime / Unified Comfort Panel
Setup: Engineering laptop, PLC tags or simulator, Unified runtime target
01
STEP 01
Open WinCC Unified and load the training project for WinCC Unified SCADA Manual.
v
02
STEP 02
Create or open the practical object for Configure Alarm View.
v
03
STEP 03
Configure the required tags, parameters, blocks or screen objects for this WinCC Unified SCADA workflow.
v
04
STEP 04
Run compile, simulation, runtime or online monitoring as applicable and verify the practical behavior.
v
05
STEP 05
Save the work, record the result and tick Practical Configure Alarm View as complete.

Expected Result

Configure Alarm View is completed, verified and documented inside the WinCC Unified SCADA Manual workflow.

P09

Softwell Digital Practical Manual

Practical 09 - Create Trend Control

Philosophy: Open the software, open the Softwell manual, and perform the practical.

WinCC UnifiedSCADAHMIRuntime
Software: WinCC Unified, TIA Portal, Unified Runtime / Unified Comfort Panel
Setup: Engineering laptop, PLC tags or simulator, Unified runtime target
01
STEP 01
Open WinCC Unified and load the training project for WinCC Unified SCADA Manual.
v
02
STEP 02
Create or open the practical object for Create Trend Control.
v
03
STEP 03
Configure the required tags, parameters, blocks or screen objects for this WinCC Unified SCADA workflow.
v
04
STEP 04
Run compile, simulation, runtime or online monitoring as applicable and verify the practical behavior.
v
05
STEP 05
Save the work, record the result and tick Practical Create Trend Control as complete.

Expected Result

Create Trend Control is completed, verified and documented inside the WinCC Unified SCADA Manual workflow.

P10

Softwell Digital Practical Manual

Practical 10 - Configure Tag Logging

Philosophy: Open the software, open the Softwell manual, and perform the practical.

WinCC UnifiedSCADAHMIRuntime
Software: WinCC Unified, TIA Portal, Unified Runtime / Unified Comfort Panel
Setup: Engineering laptop, PLC tags or simulator, Unified runtime target
01
STEP 01
Open WinCC Unified and load the training project for WinCC Unified SCADA Manual.
v
02
STEP 02
Create or open the practical object for Configure Tag Logging.
v
03
STEP 03
Configure the required tags, parameters, blocks or screen objects for this WinCC Unified SCADA workflow.
v
04
STEP 04
Run compile, simulation, runtime or online monitoring as applicable and verify the practical behavior.
v
05
STEP 05
Save the work, record the result and tick Practical Configure Tag Logging as complete.

Expected Result

Configure Tag Logging is completed, verified and documented inside the WinCC Unified SCADA Manual workflow.

P11

Softwell Digital Practical Manual

Practical 11 - Recipe Screen Practical

Philosophy: Open the software, open the Softwell manual, and perform the practical.

WinCC UnifiedSCADAHMIRuntime
Software: WinCC Unified, TIA Portal, Unified Runtime / Unified Comfort Panel
Setup: Engineering laptop, PLC tags or simulator, Unified runtime target
01
STEP 01
Open WinCC Unified and load the training project for WinCC Unified SCADA Manual.
v
02
STEP 02
Create or open the practical object for Recipe Screen Practical.
v
03
STEP 03
Configure the required tags, parameters, blocks or screen objects for this WinCC Unified SCADA workflow.
v
04
STEP 04
Run compile, simulation, runtime or online monitoring as applicable and verify the practical behavior.
v
05
STEP 05
Save the work, record the result and tick Practical Recipe Screen Practical as complete.

Expected Result

Recipe Screen Practical is completed, verified and documented inside the WinCC Unified SCADA Manual workflow.

P12

Softwell Digital Practical Manual

Practical 12 - User Login and Roles

Philosophy: Open the software, open the Softwell manual, and perform the practical.

WinCC UnifiedSCADAHMIRuntime
Software: WinCC Unified, TIA Portal, Unified Runtime / Unified Comfort Panel
Setup: Engineering laptop, PLC tags or simulator, Unified runtime target
01
STEP 01
Open WinCC Unified and load the training project for WinCC Unified SCADA Manual.
v
02
STEP 02
Create or open the practical object for User Login and Roles.
v
03
STEP 03
Configure the required tags, parameters, blocks or screen objects for this WinCC Unified SCADA workflow.
v
04
STEP 04
Run compile, simulation, runtime or online monitoring as applicable and verify the practical behavior.
v
05
STEP 05
Save the work, record the result and tick Practical User Login and Roles as complete.

Expected Result

User Login and Roles is completed, verified and documented inside the WinCC Unified SCADA Manual workflow.

P13

Softwell Digital Practical Manual

Practical 13 - Screen Popup Practical

Philosophy: Open the software, open the Softwell manual, and perform the practical.

WinCC UnifiedSCADAHMIRuntime
Software: WinCC Unified, TIA Portal, Unified Runtime / Unified Comfort Panel
Setup: Engineering laptop, PLC tags or simulator, Unified runtime target
01
STEP 01
Open WinCC Unified and load the training project for WinCC Unified SCADA Manual.
v
02
STEP 02
Create or open the practical object for Screen Popup Practical.
v
03
STEP 03
Configure the required tags, parameters, blocks or screen objects for this WinCC Unified SCADA workflow.
v
04
STEP 04
Run compile, simulation, runtime or online monitoring as applicable and verify the practical behavior.
v
05
STEP 05
Save the work, record the result and tick Practical Screen Popup Practical as complete.

Expected Result

Screen Popup Practical is completed, verified and documented inside the WinCC Unified SCADA Manual workflow.

P14

Softwell Digital Practical Manual

Practical 14 - Runtime Simulation

Philosophy: Open the software, open the Softwell manual, and perform the practical.

WinCC UnifiedSCADAHMIRuntime
Software: WinCC Unified, TIA Portal, Unified Runtime / Unified Comfort Panel
Setup: Engineering laptop, PLC tags or simulator, Unified runtime target
01
STEP 01
Open WinCC Unified and load the training project for WinCC Unified SCADA Manual.
v
02
STEP 02
Create or open the practical object for Runtime Simulation.
v
03
STEP 03
Configure the required tags, parameters, blocks or screen objects for this WinCC Unified SCADA workflow.
v
04
STEP 04
Run compile, simulation, runtime or online monitoring as applicable and verify the practical behavior.
v
05
STEP 05
Save the work, record the result and tick Practical Runtime Simulation as complete.

Expected Result

Runtime Simulation is completed, verified and documented inside the WinCC Unified SCADA Manual workflow.

P15

Softwell Digital Practical Manual

Practical 15 - Download Unified HMI

Philosophy: Open the software, open the Softwell manual, and perform the practical.

WinCC UnifiedSCADAHMIRuntime
Software: WinCC Unified, TIA Portal, Unified Runtime / Unified Comfort Panel
Setup: Engineering laptop, PLC tags or simulator, Unified runtime target
01
STEP 01
Open WinCC Unified and load the training project for WinCC Unified SCADA Manual.
v
02
STEP 02
Create or open the practical object for Download Unified HMI.
v
03
STEP 03
Configure the required tags, parameters, blocks or screen objects for this WinCC Unified SCADA workflow.
v
04
STEP 04
Run compile, simulation, runtime or online monitoring as applicable and verify the practical behavior.
v
05
STEP 05
Save the work, record the result and tick Practical Download Unified HMI as complete.

Expected Result

Download Unified HMI is completed, verified and documented inside the WinCC Unified SCADA Manual workflow.

P16

Softwell Digital Practical Manual

Practical 16 - Communication Diagnostics

Philosophy: Open the software, open the Softwell manual, and perform the practical.

WinCC UnifiedSCADAHMIRuntime
Software: WinCC Unified, TIA Portal, Unified Runtime / Unified Comfort Panel
Setup: Engineering laptop, PLC tags or simulator, Unified runtime target
01
STEP 01
Open WinCC Unified and load the training project for WinCC Unified SCADA Manual.
v
02
STEP 02
Create or open the practical object for Communication Diagnostics.
v
03
STEP 03
Configure the required tags, parameters, blocks or screen objects for this WinCC Unified SCADA workflow.
v
04
STEP 04
Run compile, simulation, runtime or online monitoring as applicable and verify the practical behavior.
v
05
STEP 05
Save the work, record the result and tick Practical Communication Diagnostics as complete.

Expected Result

Communication Diagnostics is completed, verified and documented inside the WinCC Unified SCADA Manual workflow.

P17

Softwell Digital Practical Manual

Practical 17 - Create Report Screen

Philosophy: Open the software, open the Softwell manual, and perform the practical.

WinCC UnifiedSCADAHMIRuntime
Software: WinCC Unified, TIA Portal, Unified Runtime / Unified Comfort Panel
Setup: Engineering laptop, PLC tags or simulator, Unified runtime target
01
STEP 01
Open WinCC Unified and load the training project for WinCC Unified SCADA Manual.
v
02
STEP 02
Create or open the practical object for Create Report Screen.
v
03
STEP 03
Configure the required tags, parameters, blocks or screen objects for this WinCC Unified SCADA workflow.
v
04
STEP 04
Run compile, simulation, runtime or online monitoring as applicable and verify the practical behavior.
v
05
STEP 05
Save the work, record the result and tick Practical Create Report Screen as complete.

Expected Result

Create Report Screen is completed, verified and documented inside the WinCC Unified SCADA Manual workflow.

P18

Softwell Digital Practical Manual

Practical 18 - Backup Unified Project

Philosophy: Open the software, open the Softwell manual, and perform the practical.

WinCC UnifiedSCADAHMIRuntime
Software: WinCC Unified, TIA Portal, Unified Runtime / Unified Comfort Panel
Setup: Engineering laptop, PLC tags or simulator, Unified runtime target
01
STEP 01
Open WinCC Unified and load the training project for WinCC Unified SCADA Manual.
v
02
STEP 02
Create or open the practical object for Backup Unified Project.
v
03
STEP 03
Configure the required tags, parameters, blocks or screen objects for this WinCC Unified SCADA workflow.
v
04
STEP 04
Run compile, simulation, runtime or online monitoring as applicable and verify the practical behavior.
v
05
STEP 05
Save the work, record the result and tick Practical Backup Unified Project as complete.

Expected Result

Backup Unified Project is completed, verified and documented inside the WinCC Unified SCADA Manual workflow.

P19

Softwell Digital Practical Manual

Practical 19 - Integrated PLC HMI Test

Philosophy: Open the software, open the Softwell manual, and perform the practical.

WinCC UnifiedSCADAHMIRuntime
Software: WinCC Unified, TIA Portal, Unified Runtime / Unified Comfort Panel
Setup: Engineering laptop, PLC tags or simulator, Unified runtime target
01
STEP 01
Open WinCC Unified and load the training project for WinCC Unified SCADA Manual.
v
02
STEP 02
Create or open the practical object for Integrated PLC HMI Test.
v
03
STEP 03
Configure the required tags, parameters, blocks or screen objects for this WinCC Unified SCADA workflow.
v
04
STEP 04
Run compile, simulation, runtime or online monitoring as applicable and verify the practical behavior.
v
05
STEP 05
Save the work, record the result and tick Practical Integrated PLC HMI Test as complete.

Expected Result

Integrated PLC HMI Test is completed, verified and documented inside the WinCC Unified SCADA Manual workflow.

P20

Softwell Digital Practical Manual

Practical 20 - Final WinCC Unified SCADA Project

Philosophy: Open the software, open the Softwell manual, and perform the practical.

WinCC UnifiedSCADAHMIRuntime
Software: WinCC Unified, TIA Portal, Unified Runtime / Unified Comfort Panel
Setup: Engineering laptop, PLC tags or simulator, Unified runtime target
01
STEP 01
Open WinCC Unified and load the training project for WinCC Unified SCADA Manual.
v
02
STEP 02
Create or open the practical object for Final WinCC Unified SCADA Project.
v
03
STEP 03
Configure the required tags, parameters, blocks or screen objects for this WinCC Unified SCADA workflow.
v
04
STEP 04
Run compile, simulation, runtime or online monitoring as applicable and verify the practical behavior.
v
05
STEP 05
Save the work, record the result and tick Practical Final WinCC Unified SCADA Project as complete.

Expected Result

Final WinCC Unified SCADA Project is completed, verified and documented inside the WinCC Unified SCADA Manual workflow.

Verified learning pathway

Practise This Manual with Guidance

Use the manual with trainer-led practicals, software exercises and troubleshooting support.

Content reviewed: 14 July 2026

Technical Video HubPLC SCADA TrainingAsk a Technical QuestionJoin the Related Hands-on Training

Wincc Unified Manual: Practical Scope and Learning Value

This page is focused on Wincc Unified Manual and explains how it connects with Industrial Automation, Practical Guide, and practical industrial requirements. Softwell Automation presents the topic for engineers, students, maintenance teams and corporate learners who need clear technical understanding rather than only theoretical definitions.

How Wincc Unified Manual supports industrial automation

The learning path combines concept explanation, software workflow, hardware awareness, diagnostics and application-oriented practice. Related PLC, SCADA, HMI, VFD, networking, Practical Guide and Industry 4.0 resources are interlinked so visitors can move from introduction to practical implementation without searching disconnected pages.

Related Practical Guide resources and next steps

For better decision-making, compare the course page, related manual, practical video series and enquiry options. This creates a transparent view of the syllabus, trainer approach and technical depth before registration or a corporate training discussion.

☎ Call WhatsApp ✉ Email Enquire Now